Material Development

Specifying Maharam Rugs, Upholstery, and Curtain Fabrics? A Quality Inspector's 7-Step Checklist

Before you sign off on that Maharam rug order—or any contract textile order—there are a few things I'd check first. I'm a quality and compliance manager for a commercial textile distributor. I review roughly 200 deliveries a year, and I've rejected my share of first shipments. In Q1 2024, 9% of the first submissions we received failed on color consistency or construction documentation. This checklist is the short version of what I walk through before approving an order.

Quick caveat: if you're buying one rug for your living room, most of this is overkill. This is for designers, purchasing agents, and facility managers who are specifying textiles at scale. If that's you, keep reading.

1. Confirm the Product Line Matches the Spec, Not Just the Look

With Maharam rugs specifically—and Maharam area rugs are no exception—the product code matters more than the name. I've seen orders where the colorway was correct but the construction was the residential version instead of the contract version. They look similar on a screen. They don't wear the same.

Check three things before you approve a PO: the product code, the dye lot, and the backing. If the rug has a latex backing and the spec calls for a woven backing, stop. The visual is not the spec.

Also—this trips people up—a dye lot change doesn't always show up in a small swatch. If you're ordering multiple rugs for the same installation, ask the supplier to confirm that all rolls are from the same dye lot. Otherwise you can end up with two “same” rugs that are noticeably different under daylight.

2. Verify Abrasion Claims Against the Right Standard

People think a high Wyzenbeek count means a fabric is bulletproof. It doesn't. Wyzenbeek abrasion (ASTM D3597) measures one type of surface wear under dry conditions. It tells you almost nothing about seam slippage, pilling, or what happens after a chair leg catches the fabric. Actually, a fabric that performs well on abrasion can still fail on seam strength.

Here's what I look for instead: abrasion is one data point, not the whole story. For contract upholstery, I check the ACT Performance Guidelines—they cover abrasion, pilling, seam slippage, and lightfastness. If a supplier can't share those numbers, I treat the fabric with caution.

Don't hold me to this, but I usually start getting uncomfortable below 30,000 double rubs on a Wyzenbeek for high-traffic upholstery. If a fabric has a 100,000-cycle claim but fails on pilling, it's still going in a bin.

3. Ask for Current Compliance Documents

Flame retardancy is the one place I don't do “trust me.” For upholstery, ask for California TB 117-2013 compliance. For drapery, NFPA 701 is common. For panels, maybe ASTM E84. The key word is current—certificates expire, and manufacturers reformulate.

I had a vendor send me a flame certificate from 2018 once. The product had been updated twice since then. The certificate didn't apply to what we were buying. That was a $22,000 mistake that we caught before production—but only because we asked.

Roughly speaking, if a supplier can't produce the document within a business day, that's a red flag. Not a “we'll get back to you next week” red flag. A “find another source” red flag.

4. If You're Vetting a Velvet Curtain Fabric Supplier, Test the Drape and the Backing

Velvet is a texture-first purchase, which makes it easy to get wrong. When I evaluate a velvet curtain fabric supplier, I don't just feel the face of the fabric. I hang it. A velvet can feel luxurious in your hand and still not drape worth a damn.

I've never fully understood why velvet is treated as one category in catalogs. A slub velvet, a panne velvet, and a velvet with a cotton back can all be called “velvet,” and they behave completely differently.

Here's what I'd test: the vertical drape of a full panel, the stretching at the selvedge, and how the fabric holds up in a sewn seam. Also check the backing. A cheap backing can cause curl at the edges, which makes sewing misery. If you're ordering a large quantity of velvet curtains, ask for a full-width sample—not a swatch. A swatch tells you the color. It doesn't tell you how the fabric hangs.

5. How to Evaluate Outdoor Furniture Fabric Manufacturers: Test the System, Not Just the Fabric

Outdoor fabric is where I see the biggest gap between marketing claims and real performance. If you're evaluating outdoor furniture fabric manufacturers, don't stop at the fabric's abrasion or colorfastness. Ask how the finished product is tested.

Here's why: the fabric might resist UV, but the thread and zippers might not. The cushion might shed water, but if the seam tape isn't breathable, you'll get mold inside. The whole assembly is the product.

I also look for a clear statement on xenon arc testing—AATCC 16.3 is the one I'm most familiar with—and whether the color rating is for the entire expected life or just the first season. Some suppliers quote a colorfastness rating on greige fabric that doesn't hold up after quilting or laminating. It's not dishonest; it's just incomplete.

Honest limitation: this approach is for contract outdoor furniture—hospitality, offices, healthcare. If you're building marine upholstery, stop reading and talk to someone who tests for saltwater and mildew. Different world.

6. Request a Production Drawdown for Bulk Upholstery Fabric

Bulk upholstery fabric is a different animal from a piece order. The sample you approved was from a master roll. The production rolls are a separate run. That's why I always request a drawdown: a piece of the actual production run, before it ships.

In 2022, I approved a fabric based on a lab dip, then the production run came in 14% lighter. The vendor said it was “within tolerance.” We said no. They redid it at their cost, and now their contract includes a ΔE clause.

To be honest, I'm not sure why some colorways drift more than others. My best guess is that the dye lots interact with the base cloth in ways they don't predict. So I've learned to protect myself with a production drawdown instead of relying on the lab.

7. Understand MOQs, Lead Times, and Backup Options

Contract textile ordering almost always involves minimums. For Maharam and most spec-grade suppliers, you're not going to buy 10 yards of a Maharam area rug. But for bulk upholstery fabric and custom velvet, minimums are a real conversation.

I usually ask three questions: What's the minimum per colorway? What's the production lead time? And what happens if a roll is damaged in transit? The third one matters more than people think.

If a supplier promises immediate delivery on every item, I get suspicious. Nobody stocks 2,000 SKUs in bulk. They might have a warehouse, but they probably don't have your specific color in your quantity.

Also, don't hold me to this, but most contract fabric converters I've worked with have MOQs in the 50–150 yard range per colorway. If someone quotes you a 500-yard minimum for a stock fabric, ask why.

Common Mistakes I Catch in Final Approvals

Here are the errors I catch most often, in no particular order:

  • Specifying from a computer screen. Colors look different on every monitor. You need physical samples.
  • Skipping the production drawdown because “it's the same fabric.” It's not.
  • Accepting a certificate without checking the date or the product name.
  • Assuming high price equals high performance. Price is a positioning tactic. Performance is a test result.
  • Using one swatch to judge pattern repeat across a full width.

Remember: this checklist won't tell you which supplier is the best. “Best” doesn't exist. It tells you where things fall apart—and that's usually the dye lot, the backing, the seam, or the certificate.

Lucia Bianchi
Lucia Bianchi

Lucia Bianchi is a woven apparel-fabric analyst covering cotton, linen, wool, rayon, denim, shirting, twill, satin, poplin, and blended garment fabrics. She applies the ISO 1833 series for fibre composition and ISO 105-C06 for laundering colourfastness while checking GSM, yarn count, usable width, shrinkage, skew, shade grade, drape, and surface defects. Her specification guides help designers, sourcing teams, and mills align fibre claims, lab dips, bulk tolerances, care conditions, and garment performance before production approval.